-
-
Post Thanks / Like - 1 Thanks, 1 Likes, 0 Dislikes
-
I will have to make some steering linkage. I cannot find it
Axiom motors I believe 55 turn castle mamba max
-
Great start, I can't wait until the spring and get these supers on the rocks.
EPARCCrawlers President
2010 1.9 Inaugural Champion
2011 Class 2 Scale Season Champion
2012 Club Champion 1.9, 2.2, Class 1, Class 2
2013 Class 2 Scale Season Champion
2014 East Coast G6 1.9 Driver of the Day
TEAM DRIVER
OTTSIX
TEAM DRIVER
Purpmart Specialist
TEAM DRIVER
CREATIONFAB Web Wheeler
-
Started out as a Clodbuster.
TCS NN chassis
Delrin skid plate
Aluminum axle tubes and C's
JP Custom RC's Knuckles
40 series X-lock tires
40 series Axial Beadlocks
Flipped rear axle with BTA steering
Reservoir shocks (unknown brand)
Stainless upper links
1/2" Delrin lower links
Axiom motors not sure how many turn
Mamba max ESC
Cc BEC.
I know I will have to do some stuff to this like change the lower links and move the shocks out and I am sure that's just the beginning lol
Or just run it like it is and build a better one like John's down the road
-
You should be able to see the turn of the motor stamped on the arm. inside the can.
EPARCCrawlers President
2010 1.9 Inaugural Champion
2011 Class 2 Scale Season Champion
2012 Club Champion 1.9, 2.2, Class 1, Class 2
2013 Class 2 Scale Season Champion
2014 East Coast G6 1.9 Driver of the Day
TEAM DRIVER
OTTSIX
TEAM DRIVER
Purpmart Specialist
TEAM DRIVER
CREATIONFAB Web Wheeler
-
I might have some taller wheels in the future you could use.
EPARCCrawlers President
2010 1.9 Inaugural Champion
2011 Class 2 Scale Season Champion
2012 Club Champion 1.9, 2.2, Class 1, Class 2
2013 Class 2 Scale Season Champion
2014 East Coast G6 1.9 Driver of the Day
TEAM DRIVER
OTTSIX
TEAM DRIVER
Purpmart Specialist
TEAM DRIVER
CREATIONFAB Web Wheeler
-
ok ty I did not know that. I have never taken one apart
-

Originally Posted by
mr4x4king
ok ty I did not know that. I have never taken one apart
You don't have to take them apart, look in the vent holes on the side of the can. many machine wound motors are stamped, you might have to rotate the arm. to see it.
EPARCCrawlers President
2010 1.9 Inaugural Champion
2011 Class 2 Scale Season Champion
2012 Club Champion 1.9, 2.2, Class 1, Class 2
2013 Class 2 Scale Season Champion
2014 East Coast G6 1.9 Driver of the Day
TEAM DRIVER
OTTSIX
TEAM DRIVER
Purpmart Specialist
TEAM DRIVER
CREATIONFAB Web Wheeler
-
......Build it.....
You have a good starter truck to see if you like running Supers. You don't need a ton of parts to get it up and going, I have a Punk Dig you can have, that will save you a few dollars and you can run any 3 position 3 ch radio for now
Why do I care where Waldo is?
THE MASTER!!
-
Thanks John I will have to get with you to get the punk dig.
Let me know if you need anything
I did not see the turn of the motor stamped on the arm. inside the can
Is there any other way to tell what turn they are?
With something this big what turn motors would you suggest?