Warning: preg_replace(): The /e modifier is deprecated, use preg_replace_callback instead in ..../includes/class_bbcode.php on line 2958
Class 1 Isuzu Amigo (yes it's metal!)
Results 1 to 2 of 2

Thread: Class 1 Isuzu Amigo (yes it's metal!)

  1. #1
    Senior Member
    Join Date
    Jul 2010
    Post Thanks / Like
    Rep Power

    Class 1 Isuzu Amigo (yes it's metal!)

    Well with the upcoming new year i decided to tackle another metal body.

    I acquired an Isuzu Amigo on loan from a club member a long time ago and i'm finally going to use it.

    it is mostly unmolested with the exception of the corners of the fenders and some scratches

    To begin, i carefully took the body apart

    then i started sanding the scratches out and prepping the body for paint. the body needs to be a smooth as possible before i mold it to get the best results

    the bigger scratches were filled

    then after primer and more sanding a coat of gloss black

    the paint cam out ok except for the hood.

    apparently, the sticker was applied at the factory with a silicone based adhesive and although it was completely sanded, cleaned with hot soapy water, alcohol and did not show through the primer, the paint went bad.

    either way i can still use it. i'll just wet sand until flat, make my molds and repaint the body for the owner.

    to get an idea of how the final truck will look, i mocked up the axles i'm going to use which are RC4WD's yota axles and Landy wheels with MT tires

    They fit pretty good although they could be a bit narrower

    More later!

  2. Likes JSLICK liked this post
  3. #2
    Sage member cjsmith4's Avatar
    Join Date
    Sep 2011
    A, A
    Post Thanks / Like
    Rep Power
    Dude, as always. Another awesome build to follow! Can't wait to see this progress.
    Micro Eclipse
    1.9 Mini Juice
    2.2 XR Sudo Pro
    2.2 SuckerPunch Sporty
    Class 2 SCX Yota

Similar Threads

  1. Metal Wraith....
    By Docthrush in forum Class 3 - "Modified"
    Replies: 27
    Last Post: 08-21-2014, 06:12 PM
  2. Metal Mashers rig in RCDRIVER
    By JSLICK in forum General Discussion
    Replies: 2
    Last Post: 12-10-2013, 02:09 AM
  3. bmf metal chasis
    By bmf in forum Class 3 - "Modified"
    Replies: 1
    Last Post: 04-07-2013, 01:40 PM
  4. Metal lockers
    By Tin Soldier in forum 1.9
    Replies: 5
    Last Post: 07-02-2010, 06:18 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts