Page 1 of 3 123 LastLast
Results 1 to 10 of 25

Thread: Need your opinion on another new project

  1. #1
    Senior Member mr4x4king's Avatar
    Join Date
    Jul 2012
    Location
    Nesquehoning, Pennsylvania, United States
    Posts
    405
    Post Thanks / Like
    Rep Power
    10

    Need your opinion on another new project

    Please tell me what you think this is worth and what would you to do it.
    let me know what motor esc combo would you use?
    would you set it up for 4ws
    I love opinions

    -V3 Super Juice Carbon Fiber Chassis by Y-Town
    -65:1 Super Bully Axles
    -Custom Narrowed 23mm hex Proline Beadlocks
    -Crawler Innovations Cut-n-Shut Tires and Foams
    -MT Head Dual Servo Mounts (optional)
    -Alloy 4-Link
    -Delrin Steering Links
    an extra body panels, battery plates, and weights
    10376824_1432352440388376_7325216023137883791_n.jpg
    10881917_1432352283721725_805919507614589249_n.jpg
    1959393_1432352320388388_8789069998535210279_n.jpg
    10888700_1432780760345544_6403354824247381486_n.jpg
    10891968_1432352363721717_1504071194940319350_n.jpg
    10898049_1432352407055046_7012039714903628941_n.jpg
    10888432_1432352457055041_8380958444425822306_n.jpg
    Last edited by mr4x4king; 12-31-2014 at 03:14 PM.

  2. #2
    President JSLICK's Avatar
    Join Date
    Apr 2010
    Location
    Stowe, Pa
    Posts
    3,624
    Post Thanks / Like
    Rep Power
    10
    What is he asking for it? Since there are no electronics I would say not much more than $400-450. I he is asking for more than $500 I would pass. If you can pick it up for $300 that would be a good deal. Chassis is a proven design, used $130. Axles used $200ish. Wheel tire combo $80. I really like the knuckle weight/ holders. It does not look like an extra body, just panels.

    I would go brxls and mt4 with big servos, for motors a good 45t. The electronics alone is a big pill to swallow.
    Last edited by JSLICK; 12-31-2014 at 03:14 PM.
    EPARCCrawlers President

    2010 1.9 Inaugural Champion
    2011 Class 2 Scale Season Champion
    2012 Club Champion 1.9, 2.2, Class 1, Class 2
    2013 Class 2 Scale Season Champion
    2014 East Coast G6 1.9 Driver of the Day


    TEAM DRIVER
    LOCKED UP RC
    - SCALE PERFORMANCE PARTS -

    TEAM DRIVER
    OTTSIX

    TEAM DRIVER
    Purpmart Specialist

    TEAM DRIVER
    CREATIONFAB Web Wheeler


  3. #3
    Senior Member mr4x4king's Avatar
    Join Date
    Jul 2012
    Location
    Nesquehoning, Pennsylvania, United States
    Posts
    405
    Post Thanks / Like
    Rep Power
    10
    300 shipped to me so I am pretty happy

    what about motors?
    Last edited by mr4x4king; 12-31-2014 at 03:19 PM.

  4. #4
    President JSLICK's Avatar
    Join Date
    Apr 2010
    Location
    Stowe, Pa
    Posts
    3,624
    Post Thanks / Like
    Rep Power
    10
    Awesome, now you are going to look at about that same amount in electronics.
    Last edited by mr4x4king; 12-31-2014 at 03:19 PM.
    EPARCCrawlers President

    2010 1.9 Inaugural Champion
    2011 Class 2 Scale Season Champion
    2012 Club Champion 1.9, 2.2, Class 1, Class 2
    2013 Class 2 Scale Season Champion
    2014 East Coast G6 1.9 Driver of the Day


    TEAM DRIVER
    LOCKED UP RC
    - SCALE PERFORMANCE PARTS -

    TEAM DRIVER
    OTTSIX

    TEAM DRIVER
    Purpmart Specialist

    TEAM DRIVER
    CREATIONFAB Web Wheeler


  5. #5
    President JSLICK's Avatar
    Join Date
    Apr 2010
    Location
    Stowe, Pa
    Posts
    3,624
    Post Thanks / Like
    Rep Power
    10
    Brood or Holmes. Or just to get you going integy 45t lathe motors. A good set of matched Brood or Holmes motors will set you back a good chunk of change.
    EPARCCrawlers President

    2010 1.9 Inaugural Champion
    2011 Class 2 Scale Season Champion
    2012 Club Champion 1.9, 2.2, Class 1, Class 2
    2013 Class 2 Scale Season Champion
    2014 East Coast G6 1.9 Driver of the Day


    TEAM DRIVER
    LOCKED UP RC
    - SCALE PERFORMANCE PARTS -

    TEAM DRIVER
    OTTSIX

    TEAM DRIVER
    Purpmart Specialist

    TEAM DRIVER
    CREATIONFAB Web Wheeler


  6. #6
    Senior Member mr4x4king's Avatar
    Join Date
    Jul 2012
    Location
    Nesquehoning, Pennsylvania, United States
    Posts
    405
    Post Thanks / Like
    Rep Power
    10
    so what motors would I need to power the big guy.

    I have 2 brand new castle micro sidewinders esc's. and 2 Motors- custom 35t broods

    I also have dual Tekin FXR esc's and Tekin 35t motors.

    I have 2 integy 55 turns and a sidewinder esc but I would need a punk dig
    Last edited by mr4x4king; 12-31-2014 at 03:56 PM.

  7. #7
    President JSLICK's Avatar
    Join Date
    Apr 2010
    Location
    Stowe, Pa
    Posts
    3,624
    Post Thanks / Like
    Rep Power
    10
    I would say the dual escs and 55t would be the best place to start. I don't think the 35t will have enough torque. I could be wrong.
    EPARCCrawlers President

    2010 1.9 Inaugural Champion
    2011 Class 2 Scale Season Champion
    2012 Club Champion 1.9, 2.2, Class 1, Class 2
    2013 Class 2 Scale Season Champion
    2014 East Coast G6 1.9 Driver of the Day


    TEAM DRIVER
    LOCKED UP RC
    - SCALE PERFORMANCE PARTS -

    TEAM DRIVER
    OTTSIX

    TEAM DRIVER
    Purpmart Specialist

    TEAM DRIVER
    CREATIONFAB Web Wheeler


  8. #8
    Senior Member Winnerone23's Avatar
    Join Date
    Jun 2012
    Location
    williamsport
    Posts
    262
    Post Thanks / Like
    Rep Power
    6
    Can you mix match ur esc's and motors?

    Dual fxr's and the 55t's geared up, or the 35t's geared down..

    I don't hear good things about the micros holding up to the super..
    Let's do some Crawlering!
    Team Holmes Hobbies
    Team BmachineRC
    Team Krazed Builds
    Team PURPMART

  9. #9
    Senior Member mr4x4king's Avatar
    Join Date
    Jul 2012
    Location
    Nesquehoning, Pennsylvania, United States
    Posts
    405
    Post Thanks / Like
    Rep Power
    10
    I have 2 brand new castle micro sidewinders esc's. and 2 Motors- custom 35t broods
    these are in the 2.2 pro so I think I will leave that where it is

    I also have dual Tekin FXR esc's and Tekin 35t motors.
    this is in my xr10 so I can take these out and use this setup


    I have 2 integy 55 turns and a sidewinder esc but I would need a punk dig
    these are in my other xr10

    or I can take these out of the other super I have
    Axiom motors I believe 55 turn castle mamba max
    I looked all over these motors and I was told I should be able to see the turn of the motor stamped on the arm in the vent holes on the side of the can. many machine wound motors are stamped, you might have to rotate the arm. to see it.
    inside the can. but I did not see anything.

    not really sure biggest thing is finding time

    I think I will look around for some more FXR's this way I can take out the mamba max in the other super

  10. #10
    Senior Member mr4x4king's Avatar
    Join Date
    Jul 2012
    Location
    Nesquehoning, Pennsylvania, United States
    Posts
    405
    Post Thanks / Like
    Rep Power
    10
    what pinion gears do I use?

    these should be the axles http://store.rc4wd.com/Super-Bully-L...box_p_491.html

    in the parts list it says to use Bully pinion gear (Part # Z-G0036)

    http://store.rc4wd.com/Bully-12T-Pinion-Gear_p_93.html

    or do I use the super bully ones since they are supper bully axles

    I just want to make sure before I order

    http://store.rc4wd.com/Super-Bully-6...r-_p_1210.html

    I want to order qty 2 of each from 10t to 15 turn since I am not sure what motors I will use
    this way I have them to gear up or down
    Last edited by mr4x4king; 01-09-2015 at 03:33 PM.

  11. Thanks JSLICK thanked for this post
Page 1 of 3 123 LastLast

Similar Threads

  1. What is you opinion of this
    By mr4x4king in forum Off Topic
    Replies: 23
    Last Post: 08-23-2014, 01:44 AM
  2. need your opinion
    By freak in forum Off Topic
    Replies: 16
    Last Post: 10-23-2012, 07:55 PM
  3. Need your opinion.
    By rik in forum General Discussion
    Replies: 16
    Last Post: 11-23-2011, 01:09 PM
  4. Another project?
    By Quirk in forum Misc Pics and Videos
    Replies: 1
    Last Post: 07-07-2010, 01:48 AM
  5. tire opinion
    By MarineRabbit in forum Tires and Wheels
    Replies: 7
    Last Post: 06-13-2010, 05:44 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •