View Full Version : Easy wheel weights for - Motoworx Wheels

01-03-2011, 07:00 PM
So I've been trying to find a way to make some adjustable weights for my moroworx wheels(http://www.motoworxracing.com/1.9_rcwheels.htm) and I finaoy came up with this...

Take a 1 1/2 in washer with a 13/16th inner hole and drill two holes through it, stack them on either sied of the wheel and use two 20-24mm bolts to hold it all together.

Each washer weighs aproximatly .5oz and you can fit up to 6 washers on each wheel.

2 on the outside to move your weight s farthest away from eachother as posable and up to 4 in the inside of the wheel. Doesn't look bad either for $.30 each.

Motoworx 8 Hole 1.9 Wheel - 4oz


.5 oz washers


All put together w/ 1.5oz of weight added