PDA

View Full Version : NOVAK GOAT 2S Issue



StartGateCrasher
07-17-2010, 09:27 PM
It's a GOAT 2S system Brushless with 18.5T Motor.

Here's the problem I'm having yet again. On my goat system I can put a fresh battery on and run the truck for 2 min and it stops like it hit the lipo cut off... only the forward and reverse lights still blink and you can hear a pinging in the motor like it's trying to go forward. I check the voltage and the bateryis still putting out 7.6V? Put it back in the truck and try again and it does the same thing. Stick the batery in my MRC and I've got juce to run for a hour or so. I had this issue once before and thought it was the bateries in my radio cause it stopped once I changed the batteries. This time, still the same thing... any sugestions?

JSLICK
07-17-2010, 11:34 PM
how close is your reciever the your esc? I had to move mine farther away because it was giving off interference that would cause it not move. Just did that last night and took it to St. Pete's with Wes today and no issues.

StartGateCrasher
07-18-2010, 01:10 AM
that's a good Idea, I'll have to try that, out.