PDA

View Full Version : Motor and ESC questions for LCC



Tin Soldier
03-03-2012, 01:26 PM
SO I have been out of the comp crawling for a while. When I had my LCC before I ran a Novak Goat 3s with 21.5 brushless. Is that still a good choice or is there something better out there? Should I think about grabbing the 18.5 motor instead? I just don't even know anymore. :-)

JSLICK
03-03-2012, 02:48 PM
Do the 18.5 you will not regret it with the HD worms.

Tin Soldier
03-03-2012, 02:58 PM
I think this one has the HD worm gears. Now I just have to find a good deal on a Goat. :-) Found the 21.5 for $110.

mr4x4king
09-19-2012, 11:05 AM
I think this one has the HD worm gears. Now I just have to find a good deal on a Goat. :-) Found the 21.5 for $110.


how do i know if i have hd worm gears or not
mine is supposed to be here today

i still need to get the goat 3s with the 18.5 or the 21.5

whats the difference between them more torque?
what shout i use if i do not have hd worm gears or should i upgrade to them

JSLICK
09-19-2012, 11:47 AM
I will take a picture of the difference later today and post it for you too see. 18.5 is faster which is good for the LCC they are a slow beast.

rik
09-19-2012, 06:14 PM
Ryan, you have the HD up front and the stockers in the rear. For overdrive. The extra gears i gave you are the HD gears for the rear.

JSLICK
09-19-2012, 06:24 PM
I am driving it that way Rik and not really seeing any big difference. I am guessing that it does help, not sure how much.

JSLICK
09-19-2012, 06:36 PM
Stock Left, HD on right
http://i954.photobucket.com/albums/ae29/jslick123/IMG_1324_zps6fa2914d.jpg

mr4x4king
09-20-2012, 01:52 PM
what kind of grease do i use?

how much do i use ? pack it in?

i have not taken it apart yet to check its condition

what else should i check

JSLICK
09-20-2012, 04:00 PM
I use Lucas Red N' Tacky. Pack the worm and barrel full. If you can do the grease port mod, it makes it much easier to fill up the worms.

mr4x4king
09-20-2012, 05:09 PM
so the grease port mod is drilling and tapping a hole so you do not have to keep taking the axle apart?
then just fill axle with syringe?
does it matter where its drilled and tapped?

JSLICK
09-20-2012, 05:41 PM
Here you go.

http://www.rccrawler.com/forum/team-losi-comp-crawler/384591-worm-gear-grease-port.html