PDA

View Full Version : 1.9 tire help.



rik
09-12-2011, 09:58 PM
ok so i got the mrc pro a while back. basically i put it together, ran it for 15 minutes, and it has been sitting since. i would like to run it on the 18th at the comp. the problem is tires. it still has the stockers on it. however, i do have a set of flat irons laying here. should i run those instead? it would def give me the ground clearance. i just cant see it being worth it running the small stockers. if it matters, here's what im running.

esc= micro sidewinder
motor= stump puller
servo= some 236oz knock off (strong servo still)
battery=2c 800mah (and prob 2c 350 mah)

brazwewn
09-12-2011, 10:01 PM
I think the stock tires do ok, but so do the Flat Irons. I am planning on running stock until I get around to buying some Rovers.

Wes

JSLICK
09-12-2011, 10:03 PM
The stock tires will be ok, I have a spare set of oversized rovers you could play with if you want, they are mounted up and ready to go.

rik
09-12-2011, 10:35 PM
cool. stockers it is. thanks guys.

JSLICK
09-12-2011, 11:57 PM
if you get there early you can try out the oversize rovers if you like. Flatirons worked well in the wet.